The electrical connection should be
done by a professional according to
national, state or provincial and city
Codes.
WARNING
!
To prevent injuries, death, or
property damage, read and follow
all of the instructions and warnings.
MAINTENANCE
Regular Maintenance Safety Tips
Always disconnect the heat pump before:
Opening the access door,
Cleaning the cabinet or evaporator.
Never sit or place a heavy object on top of
the heat pump.
Never put objects in or on the protective grid
to prevent injuries or damaging the unit.
A heat pump requires professional
maintenance and repair. All “do-it-yourself”
repairs on a unit under warranty may void
the remainder of the manufacturer’s
warranty.
Maintenance or adjustments other than
those recommended in this owner’s manual
should not be attempted. Contact your
dealer for any questions or problems you
may have concerning your unit.
1. Inspect and clean the pool filter regularly
to ensure adequate water flow to the heat
pump.
2. Inspect the evaporator and rinse it using a
garden hose. Wash from top to bottom with a
stream of water to remove any grass, leaves
or other objects that could obstruct the
evaporator.
3. Clean the heat pump casing with a mild
soap (dish soap). Do not use any abrasives
or bleach.
4. Inspect the skimmer regularly. Never use
the skimmer to add chemicals to the pool.
The PH should be maintained between 7.2
and 7.8. A higher level could result in
damage to your unit and could void the
warranty.
Maintenance
10
To Next Page
Loading...
Need help?
General
