Copyright © 2003 Nokia. All rights reserved.
32
such as Cyrillic characters, more parts may be needed for the message than would
otherwise be required. Note that predictive text input may use Unicode
characters.
To send a message, the phone number of your message centre has to be saved in
the phone. See Message settings on page 37.
1. In standby mode, press Menu and select Messages and Write message.
2. Key in the message. The number of available characters and the current part
number are shown on the top right of the display.
3. When the message is complete, press Options, select Send, key in the
recipient’s phone number, and press OK.
If you want to send the message to several people, select Sending opts and
Send to many, scroll to the first recipient, and press Send. Repeat this for
each recipient.
To send a message to a predefined distribution list, select Sending opts and
Send to list. To define and edit distribution lists, see Distribution lists on page
35.
Other options are: Use template, Insert options, Small fonts or Large fonts,
Clear text, Dictionary, Instructions, Exit editor, Sending profile (refer to
Message settings on page 37), Save message, Delete and Dictionary.
To Next Page
Loading...
Need help?
General
