Menu functions
49
Copyright
© 2003 Nokia. All rights reserved.
Note that when you change the security level, all the recent calls lists,
including missed calls, received calls and dialled numbers, are cleared.
• Change of access codes: You can change the security code, PIN code, PIN2
code, or barring password. These codes can include the numbers 0 to 9 only.
Avoid using access codes similar to the emergency numbers, such as 112, to
prevent accidental dialling of the emergency number.
Restore factory settings
To reset some of the menu settings to their original values. Press Menu,
select Settings and Restore factory settings. Key in the security code and press
OK. The names and phone numbers saved in the phone book are not deleted.
■ Alarm clock (Menu 7)
You can set the alarm to sound at the time you want just
once, or repeatedly, for example every working day.
Press Menu, select Alarm clock. Key in the time for the alarm. When the
alarm sounds, you can stop the alarm by pressing . If you press Snooze,
the alarm stops and rings again in 6 minutes.
If the alarm time is reached while the phone is switched off, the phone switches itself on and
starts sounding the alarm tone. If you press , the phone asks whether you want to
activate the phone for calls. Press to switch off the phone or Yes to make and receive
calls.
To Next Page
Loading...
Need help?
General
