Some results are checked against limits. If the value is not between “Min” or “Max” it is shown with red status
indicator. It is also shown if the value is below “Min” or bigger than “Max” by highlighting the limit. The limit
fail turns also the status of step and sequence to “red”. The limits come from data package and those are
product specific.
All information shown in the result view is written to the log file during the execution.
RF testing
RF Testing tool looks visually same like RF Tuning tool. There are same controls for cable, splitter and shield
box selections.
RM-761; RM-799; RM-800
RF Troubleshooting
Page 4 – 48 COMPANY CONFIDENTIAL Issue 1
Copyright © 2011 Nokia. All rights reserved.
To Next Page
Loading...
Need help?
General
