447R
1
Service
Contents
1. Product Overview
1.1. Technical Specifications
1.2. Preset Display Modes
1.3. S---Capacitor and Linearity Control Table
1.4. Audio (Optional)
1.5. USB subsystem (Optional)
1.6. Monitor Connection
1.6.1. If your monitor is DDC compatible (PC)
1.6.2. If there is no DDC in your computer (PC)
1.7. User controls
1.8. Menu
1.8.1. Moving in the Menu
1.8.2. Exit Menu
1.8.3. Default Adjustment
1.8.4. Brightness and Contrast
2. Site Preparation
2.1. Location
2.2. Troubleshooting
2.3. Checking the Operation of PowerSaver
3. Controlling the Memory for Picture Adjustments
3.1. Memory for User A djustments
3.1.1. Adjustment
3.1.2. Resetting the User Memory
3.2. Memory for Factory Adjustments
3.2.1. Adjustment
4. Service Mode
4.1. Grouping of the adjustments
4.2. Service Menu
4.2.1. Access to the Service Mode
4.2.2. Geometry
4.2.3. Grey Scale
4.2.4. Initializing the Replacement IC (IC203 on SMA)
4.2.5. Storing Adjustments
4.2.6. Exit from Service Mode
5. Workshop Maintenance
5.1. Important Safety Notice
5.1.1. Discharging the CRT
5.2. ESD---Sensitive Parts
5.3. Test Equipment
5.4. Test Patterns
5.5. Disassembly
6. Image Performance
6.1. Active Picture Size and Location
6.2. Geometrical Distortion
6.3. Straightness of Line Segment
6.4. Linearity
6.5. Phosphor Color Coordinates
6.6. Color Temperature and Tracking
6.7. White Uniformity
6.8. Luminance
6.9. Convergence
7. Adjustment Procedure
7.1. Adjustment Flow Diagram
7.2. Preliminary Preparations
7.2.1. High Voltage
7.3. Geometry
7.4. Grey Scale
To Next Page
Loading...
Need help?
General
