Management using the Nokia Wireless app Nokia FastMile 4G Receiver Product Overview
72 3TG-00386-ABAA-TCZZA Issue: 01 DRAFT
DRAFT
• status: The current operational state of the PDN connection • EARFCN: The carrier
frequency in the uplink and downlink is designated by the E-UTRA.
Absolute Radio Frequency Channel Number (EARFCN) in the range 0 - 65535.
• PCI: The physical cellid of cell
• Current signal stats: • RSRP: RSRP (Reference Signals Received Power) is a
measurement of the received power level in an LTE cell network in dBm • RSRQ:
RSRQ (Reference Signals Received Quality) is a measurement of the received power
quality in an LTE cell network in dB
• RSSI: RSSI (Received Signal Strength Indicator) is a measurement of the power
present in a received radio signal by the Nokia FastMile 4G Receiver
• SINR: SINR (the Signal-to-Interference-plus-Noise ratio) is used in the LTE network
from the Nokia FastMile 4G Receiver side to measure the quality of wireless
connections in dB
• Average signal stats: • RSRP: average value of Reference Signal Received
Power (dBm) in the measured interval, resolution 1dBm • RSRQ: average value of
Reference Signal Received Quality (dB) in the measured interval, resolution 1dB •
RSSI: average value of Received Signal Strength indicator (dBm) in the measured
interval, resolution 1 • SINR: average value of Signal-to-Interference-plus-Noise Ratio
(dB) in the measured interval, resolution 1dB
• Other stats:
• bytes sent: the total number of bytes sent on the interface
• bytes received: the total number of bytes received on the interface
Figure 28 shows an example of the System state screen.
To Next Page
Loading...
Need help?
General
