87Copyright © 2006 Nokia. All rights reserved.
■ PTT settings
There are two kinds of PTT settings: settings for connecting to the service and settings for use.
You may receive the settings for connecting to the service from your service provider. See Configuration
settings service p. 14. You can enter the settings manually. See Configuration p. 64.
To select the settings for connecting to the service, select Menu > Push to talk > Config. settings and from the
following options:
Configuration — to select a service provider, Default, or Personal config. for PTT service. Only the configurations
that support the PTT service are shown.
Account — to select a PTT service account contained in the active configuration settings
You can also select from the following options: PTT user name, Default nickname, PTT password, Domain, and
Server address
To edit the PTT settings for use, select Menu > Push to talk > PTT settings and from the following:
1 to 1 calls > On — to select the phone to allow the reception of incoming one-to-one calls
1 to 1 calls > Off — to make but not receive one-to-one calls. The service provider may offer some services that
override these settings. To set the phone to first notify you of incoming one-to-one calls with a ringing tone,
select Notify.
Listened groups > On — to activate the listened channels
PTT status in startup > Yes — to set the phone to automatically connect to the PTT service when you switch the
phone on
Send my PTT address > No — to hide your PTT address from channel and one-to-one calls
To Next Page
Loading...
Need help?
General
Weight and Dimensions
