Settings
37
English
Idle state font colour — to select the
color for the texts on the display in
the standby mode
Operator logo — to set your phone to
display or hide the operator logo. The
menu is dimmed, if you have not
saved the operator logo. For more
information on availability of an
operator logo, contact your network
operator or service provider.
■ Mini display
Select Menu > Settings > Mini
display settings. You can change the
available settings.
■ Time and date
Select Menu > Settings > Time and
date and from the following options:
Clock — to set the phone to show the
clock in the standby mode, adjust
the clock, and select the time zone
and the time format
Date — to set the phone to show the
date in the standby mode, set the
date, and select the date format and
date separator
Auto-update of date & time
(network service) — to set the phone
to automatically update the time
and date according to the current
time zone
■ Call
Select Menu > Settings > Call and
from the following options:
Automatic volume control — to set
the phone to automatically adjust
the speaker volume according to the
background noise
Call divert (network service) — to
divert your incoming calls. You may
not be able to divert your call, if
some call barring functions are
active. See Call barring service in
"Security" p. 43.
Anykey answer > On — to answer an
incoming call, briefly press any key,
except the end key and the left and
right selection keys.
Answer when fold is opened > On —
to answer an incoming call, open the
phone.
Automatic redial > On — to set your
phone to make a maximum of 10
attempts to connect the call after an
unsuccessful call attempt
Speed dialling > On — to activate
speed dialling. To set up speed
dialling, see "Speed dials" p. 33. To
dial, press and hold the
corresponding number key.
Call waiting > Activate — to set the
network to notify you of an
incoming call while you have a call
in progress (network service). See
"Call waiting" p. 9.
9247786_6103_2_en_hk.fm Page 37 Friday, February 24, 2006 4:41 PM