75Copyright © 2005 Nokia. All rights reserved.
Data transfer with a compatible device
For synchronization, Bluetooth wireless technology or infrared is used. The other device is in the standby mode.
To start data transfer, select Menu > Settings > Connectivity > Data transfer and the transfer partner from the
list, other than Server synchronisation or PC synchronisation. According to the settings, the selected data is
copied or synchronized. The other device also must be activated for receiving data.
Synchronize from a compatible PC
Before you synchronize data from calendar, notes, and contacts from a compatible PC, you must install the
Nokia PC Suite software of your phone on the PC. Use Bluetooth wireless technology, infrared, or a USB data
cable for the synchronization, and start the synchronization from the PC.
Synchronize from a server
To use a remote Internet server, you must subscribe to a synchronization service. For more information and the
settings required for this service, contact your service provider. You may receive the settings as a configuration
message. See Configuration settings service p. 17 and Configuration p. 78.
If you have saved data on the remote Internet server, to synchronize your phone, start the synchronization
from your phone.
Select Menu > Settings > Connectivity > Data transfer > Server synchronisation. Depending on the settings,
select Initialising synchronisation or Initialising copy.
Synchronizing for the first time or after an interrupted synchronization may take up to 30 minutes to complete,
if the contacts or calendar are full.
USB data cable
You can use the USB data cable to transfer data between the memory card inserted in the phone and a
compatible PC or a printer supporting PictBridge. You can also use the USB data cable with Nokia PC Suite.
To Next Page
Loading...
Need help?
General
