Settings
61 Copyright © 2007 Nokia. All rights reserved.
Preferred access point — to view the
saved access points. Scroll to an access
point, and select Options > Details to
view the name of the service provider,
data bearer, and packet data access point
or GSM dial-up number.
Connect to serv. support — to download
the configuration settings from your
service provider if this is supported by the
service provider
Personal config. settings — to add new
personal accounts for various services,
and to activate or delete them. To add a
new personal account if you have not
added any, select Add; otherwise, select
Options > Add new. Select the service
type, and select and enter each of the
required parameters. The parameters
differ according to the selected service
type. To delete or activate a personal
account, scroll to it, and select Options >
Delete or Activate.
■ Security
When security features that restrict calls
are in use (such as call barring, closed
user group, and fixed dialing) calls still
may be possible to the official emergency
number programmed into your device.
Select Menu > Settings > Security and
from the following options:
PIN code request and UPIN code request
— to set the phone to ask for your PIN or
UPIN code every time the phone is
switched on. Some SIM cards do not
allow the code request to be turned off.
PIN2 code request — to select whether
the PIN2 code is required when using a
phone feature that is protected by the
PIN2 code. Some SIM cards do not allow
the code request to be turned off.
Call barring service — to restrict incoming
calls to and outgoing calls from your
phone (network service). A barring
password is required.
Fixed dialling — to create, edit, and
activate a list of phone numbers or
prefixes. When the list is activated, you
can only call or send messages to the
numbers on the list. If the SIM card does
not support this option, Fixed dialling is
hidden.
Closed user group — to specify a group of
people whom you can call and who can
call you (network service)
Security level > Phone — to set the phone
to ask for the security code whenever a
new SIM card is inserted into the phone.
If you select Security level > Memory, the
phone asks for the security code when
the SIM card memory is selected, and you
want to change the memory in use.
Access codes — to change the security
code, PIN code, PIN2 code, or barring
password
Code in use — to select whether the PIN
code or UPIN code is active
To Next Page
Loading...
Need help?
General
Weight and Dimensions
