Switch the device on and off
Press and hold the power key to switch
the device on and off. Press the power
key briefly to end a call or close an
application.
If the device asks for a PIN code, enter
the PIN code, and select OK.
If the device asks for the lock code,
enter the lock code, and select OK. The
factory setting for the lock code is
12345.
To set the correct time zone, time, and
date, select the country you are
presently in, then enter the local time
and date.
Antenna locations
Your device may have internal and
external antennas. Avoid touching the
antenna area unnecessarily while the
antenna is transmitting or receiving.
Contact with antennas affects the
communication quality and may cause
a higher power level during operation
and may reduce the battery life.
Configuration settings
Before you can use multimedia
messaging, e-mail, synchronisation,
streaming, and the browser, you must
have the proper configuration settings
in your device. Your device may
automatically configure browser,
multimedia messaging, access point,
and streaming settings based on the
SIM card used. If not, you can use the
Settings wizard application to
configure the settings. You may
receive the settings as a configuration
message that you can save to your
device. For more information on
availability, contact your service
provider or nearest authorised Nokia
dealer.
When you receive a configuration
message, and the settings are not
automatically saved and activated, 1
new message is displayed. To save
the settings, select Show >
Options > Save. You may need to
enter a PIN code provided by the
service provider.
Settings wizard
Select
> Settings > Sett.
wizard.
Use Settings wizard to define e-mail
and connection settings. The
10 Get started
www.nokia.com/support
Cyan
Magenta
Yellow
Black
© 2009 Nokia. All rights reserved.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
