same code. Devices that do not have a
user interface have a fixed passcode.
You need the passcode only when you
connect the devices for the first time.
After pairing, it is possible to authorise
the connection. Pairing and
authorising the connection makes
connecting quicker and easier, as you
do not have to accept the connection
between paired devices every time you
establish a connection.
The passcode for remote SIM access
must have 16 digits.
1 Select Options > New paired
device. The device starts to search
for Bluetooth devices within
range. If you have sent data using
Bluetooth connectivity before, a
list of the previous search results is
displayed. To search for more
Bluetooth devices, select More
devices.
2 Select the device with which you
want to pair, and enter the
passcode. The same passcode
must be entered to the other
device as well.
3 Select Yes to make the connection
between your device and the other
device automatic, or No to confirm
the connection manually every
time a connection attempt is
made. After pairing, the device is
saved to the paired devices page.
To give a nickname to the paired
device, select Options > Assign short
name. The nickname is only displayed
in your device.
To delete a pairing, select the device
whose pairing you want to delete and
Options > Delete. To delete all
pairings, select Options > Delete all.
If you are currently connected to a
device and cancel the pairing with that
device, pairing is removed
immediately, and the connection is
ended.
To allow a paired device to connect
automatically to your device, select Set
as authorised. Connections between
your device and the other device can
be made without your knowledge. No
separate acceptance or authorisation
is needed. Use this status for your own
devices, such as your compatible
headset or computer, or devices that
belong to someone you trust. If you
want to accept connection requests
from the other device separately every
time, select Set as unauthorised.
To use a Bluetooth audio accessory
such as a Bluetooth handsfree or
headset, you need to pair your device
with the accessory. For the passcode
and further instructions, see the
accessory user guide. To connect to the
audio accessory, switch on the
accessory. Some audio accessories
connect automatically to your device.
Otherwise, open the paired devices
tab, select the accessory and
Options > Connect to audio device.
Block devices
Select
> Settings >
Connectivity > Bluetooth.
To block a device from establishing a
Bluetooth connection to your device,
open the paired devices tab.
Connectivity 55
www.nokia.com/support
Cyan
Magenta
Yellow
Black
© 2009 Nokia. All rights reserved.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
