Headset Profile (HSP) 1.0, Hands-Free
Profile (HFP) 1.5, Advanced Audio
Distribution Profile (A2DP) 1.2, and
Audio Video Remote Control Profile
(AVRCP) 1.0 . Check with the
manufacturers of other devices to
determine their compatibility with
this device.
Get started
Keys and parts
1 Charger connector
2 Volume knob and indicator light
3 Microphone
4 Rewind key
5 Multifunction key
6 Fast-forward key
7 Play/Pause key
8 Audio connector (3.5 mm)
9 Clip
Charge the battery
Before using the headset, you
must charge the battery.
When you unplug a charger, hold
and pull the plug, not the cord.
1. Connect the charger to a wall
outlet.
2. Connect the charger cable to
the charger connector on the
headset. The red indicator light
turns green when the battery is
fully charged.
3. Disconnect the charger from
the headset, then from the wall
outlet.
The fully charged battery has
power for up to 7 hours of talk
time, up to 6 hours of music
playing time, or up to 120 hours of
standby time.
ENGLISH
Cyan
Magenta
Yellow
Black
To Next Page
Loading...
Need help?
General
