5 Push the card in, until it clicks.
6 Replace the battery and the back cover. Make sure the cover is properly closed.
You can record high-definition videos with your device. If you are recording a video to
a memory card, for the best performance, use fast, high-quality microSD cards from
known manufacturers. The recommended microSD card class is 4 (32Mbit/s (4MB/s)) or
higher.
Remove a memory card
1 Switch the device off.
2 Remove the back cover of the device.
3 If the battery is inserted, lift the battery out.
4 Push the card in, until you hear a click.
5 Pull the card out.
Charging
Charge the battery
Your battery has been partially charged at the factory, but you may need to recharge it
before you can switch on your device for the first time.
If the device indicates a low charge, do the following:
1
12 Get started
To Next Page
Loading...
Need help?
General
