Net calls
9
Copyright © 2007 Nokia. All rights reserved.
Service settings
Select > Connectivity > Internet tel., and a service.
Select Options > Settings, and a service, and press the scroll
key.
Select Login type to view or change the way Internet tel.
connects to the net call service. Select from the following:
• Automatic — Login automatically to the net call service.
When a known network is found, the device
automatically connects to the net call service. If you
use the automatic login type for WLAN networks, the
device periodically scans for WLAN networks, which
increases the demand on battery power and reduces
the battery life.
• Manual — Login manually to the net call service.
Select Saved conn. networks to view the connection
networks you have saved for the net call service or the
connection networks, which are recognized by the net call
service. These networks are used for automatic login and
are marked with a star icon on the list of connection
networks. To remove a connection network from the
service, select Options > Remove.
Select Edit service settings to open the service-specific
settings. This option is only available if a service-specific
software plugin has been installed in the device.
Profile settings
Select > Connectivity > Internet tel. to change settings.
Before you can select the default profile, you must create
profiles in > Tools > Settings > Connection > Internet
tel..
To select the profile that is used by default when you
make net calls, select > Connectivity > Internet tel. >
Options > Change service. Select the desired profile, and
press the scroll key.
To view or change the registration of your Internet
telephone profiles in the local WLAN network, select
Registration status, and press the scroll key. Scroll to the
profile that you want to register or unregister, and press
the scroll key. Press the scroll key again to select
Registered or Not registered.
Note: Only those profiles where you have
selected Registration > When needed setting in
> Tools > Settings > Connection > SIP
settings are shown in the list.
To save your settings, select Back.