Basic use
14
4. Basic use
■ Make or end a call
To make a call from your mobile device that is connected to the
speakerphone, use the device in the normal way. Speak towards the
speakerphone. For optimal performance, check that there are no objects
in front of the microphone and that the microphone is in front of you.
To redial the number you last called (if your device supports this feature
with the speakerphone), press the answer/end key twice when no call is
in progress.
To activate voice dialling (if your device supports this feature with the
speakerphone), press and hold the answer/end key for about 2 seconds
when no call is in progress. Proceed as described in the user guide of
your device.
To end a call or cancel a call attempt, press the answer/end key.
■ Answer or reject a call
When you receive a call, you hear a ringing tone through the
speakerphone and the green indicator light flashes quickly.
To answer the call, press the answer/end key. To reject the call, press the
answer/end key twice.
■ Adjust volume
To increase the speakerphone volume during a call, turn the volume
wheel right. To decrease the volume, turn the wheel left.
Warning: Do not hold the device near your ear when the loudspeaker is
in use, because the volume may be extremely loud.
■ Switch a call to the connected device
To switch a call from the speakerphone to the connected device, switch
off the speakerphone, or press and hold the answer/end key for about 2
seconds.
To Next Page
Loading...
Need help?
General
