1. Plug the charger into a wall outlet, then connect the micro-USB end of the charger's cable to your
phone.
2. When the battery is full, disconnect the charger from the phone, then from the wall outlet.
You don't need to charge the battery for a specific length of time, and you can use the phone while
it's charging.
If the battery is completely discharged, it may take up to 20 minutes before the charging indicator
is displayed.
Tip: You can use USB charging when a wall outlet is not available. Data can be transferred while
charging the device. The efficiency of USB charging power varies significantly, and it may take
a long time for charging to start and the device to start functioning.
Make sure your computer is switched on.
First connect the USB cable to the computer, then to your phone. When the battery is full, first
disconnect the USB cable from your phone, then from the computer.
The battery can be charged and discharged hundreds of times, but it will eventually wear out. When
the talk and standby times are noticeably shorter than normal, replace the battery.
Battery
Take good care of your battery, it's the life force of your phone.
Use only Microsoft Mobile approved chargers designated for this phone. You can also use a
compatible USB cable to charge your phone.
© 2014 Microsoft Mobile. All rights reserved.
14
To Next Page
Loading...
Need help?
General
