Nokia WiFi Beacon User Manual

Network | WAN
You can specify the WAN type of your Nokia
WiFi network, which affects how it connects to
the internet. Your WAN connection type
generally is determined by your Internet
Service Provider (ISP).
From the Network portion of the Settings
screen, tap WAN. You see the options DHCP,
Static, and PPPoE.
• DHCP Dynamic Host Configuration
Protocol allows your Beacon to get an IP
address automatically. This is the Nokia
WiFi default.
• Static This address does not change
automatically and has been reserved by
your ISP specifically for you.
• PPPoE Point-to-Point Protocol over
Ethernet requires a specific username and
password from your ISP and typically is
used with DSL connections.
Select Static and you must provide the
following:
• IP Address
• Subnet Mask
• Default Gateway
• Primary DNS (mandatory)
• Secondary DNS (optional)
Select PPPOE and you are instructed to
contact your ISP for the username and
password required to set configure this WAN
type.

Nokia WiFi Beacon Specifications

General

Brand	Nokia
Model	WiFi Beacon
Category	Network Router
Language	English