Physical device connections
The next few screens walk you through
connecting power and Ethernet cables
between your modem or router and the
Beacon.
• If you want to learn more about modems
and routers, from the Next we'll setup
your home for WiFi screen, tap More about
modems and routers
• When you are finished, tap <
• Tap Next
Unplug power
• You are instructed to unplug the power
from your existing modem or router
• You also should disconnect any client
devices that are plugged into the modem
or router
• Tap Next
To Next Page
Loading...
Need help?
General
