From the client device list, tap the device you
wish to view. At top of the screen, you see the
name of your client device.
Connected to Which Nokia WiFi device your
client device is connected to.
Connection The type of connection between
your client and the Nokia WiFi device; options
include
Wireless 5 GHz
,
Wireless 2.4 GHz
, and
Wired
Band Selection Set to
Automatic
by default,
this value reflects how your Nokia WiFi devices
select the band (2.4 GHz or 5 GHz) that gives
your device the best possible connection.
Note This setting can be configured only by a
Care Agent Portal operator.
TX Rate and RX Rate This is presented from
the Beacon's point of view and reports the
client device's connection speed to its
connected Beacon in Megabytes per second
(Mbps).
• TX = transmission speed from Beacon to
device
• RX = receive speed from device to Beacon
CONFIGURATION
Internet Control a device's ability to access
the Internet; enabled by default. When
disabled, you prevent that device from
accessing the internet.
Note You cannot disable this option for the
device that is running your instance of the
Nokia WiFi app, as shown to the right.
Alert Me of Issues Receive alerts if client
device marked as a
critical device
loses
connectivity.
To Next Page
Loading...
Need help?
General
