18
| NORDIC HOT TUBS | OWNER’S MANUAL
DTS ™ NORDIC STAR ™ WHIRLPOOL JET(S):
Your hot tub is equipped with at least one Whirlpool Diverter jet (2, 3 or 4 positions depending on tub model purchased),
located on the lter wall on most models. These jets, when turned, will divert water to either the Whirlpool Jet or to different
groups of wall jets. Each position is reached with a 90 degree turn of the whirlpool jet face. It is recommended to turn the
collar of the whirlpool diverter jet while the jets are in low speed operation and turn clockwise when possible. Remember,
turning your diverter will affect the ow of water to different seat jets. Turn the whirlpool diverter to see which jets turn on/off
in each position and adjust to suit your personal needs.
2-WAY DIVERTER:
With a 2-way diverter the whirlpool jet will either be on or
off. If the whirlpool jet is on, the ow to the wall jets will be
off and all the water will ow out of the whirlpool jet. If the
whirlpool jet is turned off, the ow will be diverted equally
to all the wall jets in the tub.
4-WAY DIVERTER:
With a 4-way diverter, the whirlpool jet will either be on
or off. The other (3) positions direct water ow to different
groups of wall jets depending on which model you have.
If the whirlpool is on all the ow goes thru the whirlpool
and all wall jets are off. If you turn the whirlpool off you
have 3 options to divert the water.
1. All the wall jets in the tub run equally.
2. Half the wall jets will be on the other half will be off.
3. Half that was previously on in option 2 will now be off
and the half that was off will now be on. Remember the
half that is on/off in option 2 & 3 depends on which
model you own.
4. All of the water will come out of the Whirlpool jet
OPERATING THE REST OF THE HOT TUB
1 All Seats
2 Whirlpool
1
3
2 4
Note: Turn clockwise
To Next Page
Loading...
Need help?
General
