8
Remote Controller (RC-7646M-2)
Display
(
next page)
For setting the hot
water temperature,
the flow meter alarm,
and other settings.
Power On/Off Button
For turning the
heater on and off.
Flow Meter Alarm Set Button
For setting the flow
meter alarm.
(
p.14 and 15)
Setting Buttons
* Before use, remove the protective sheet from the remote controller surface.
* The unit has been shipped from the factory with the remote controlset at 110°F.
En069M/n063S(0113)J.p65 05.10.11, 10:56 PMPage 8 AdobePageMaker6.5J/PPC