To Next Page

To Previous Page

DAW Note / Drumrack mode select

This message can be used to select the DAW Drumrack mode. It is only available in DAW mode.

Changing the mode does not change layout on the Launchpad Pro [MK3], if Note mode is selected, the

change is immediately visible, otherwise next time selecting Note mode will result in showing the

selected Drumrack mode instead.

Host => Launchpad Pro [MK3]:

Hex Version: F0h 00h 20h 29h 02h 0Eh 0Fh <Mode> F7h

Decimal Version: 240 0 32 41 2 14 15 <Mode> 247

Where the <Mode> byte can be one of the followings:

0: Note mode.

1: Drumrack.

DAW Note mode Active colour set

This message can be used to change the active colour of Note mode (which is normally green):

Host => Launchpad Pro [MK3]:

Hex Version: F0h 00h 20h 29h 02h 0Eh 17h <Colour> F7h

Decimal Version: 240 0 32 41 2 14 23 <Colour> 247

The <Colour> is a palette entry. Setting it to zero reverts to the default (green) colour.

DAW Note/Chord mode Buttons

In Note mode, Drumrack mode and Chord Mode, the following buttons may be lit with their respective

Session Mode CCs.

• Left hand buttons*, excluding the up and down buttons (CC 10, 20, …, 60)

• Track select buttons (CC 101 – 108)

• Track control buttons (CC 1-8).

• Shift button (CC 90)

• Logo (CC 99)

*(Clear not accessible in Chord Mode)

Programmer Mode

Programmer Mode provides an alternative to Session Mode for creating scripts. You can use the

Programmer / Live mode switch message to achieve this:

Host => Launchpad Pro [MK3]:

Hex Version: F0h 00h 20h 29h 02h 0Eh 0Eh <Mode> F7h

Decimal Version: 240 0 32 41 2 14 14 <Mode> 247

Where <Mode> is 0 for Live mode, 1 for Programmer mode.

Novation Launchpad Pro MK3 User Manual

Questions and Answers: