12
Using Lists
DDS makes extensive use of lists to give you fast
access to your tracks. Lists are displayed within the
Work Area and are navigated using the rotary Push
Select knob and the Menu Bar.
To move up and down through a list simply rotate the
Push Select knob. A highlight on screen indicates
which item is currently selected, and if the list is too
long to fit on screen all at once it will move up and
down as you rotate at the top or bottom of the Work
Area. For long lists a bar at the right of the Work Area
shows how much of the list you can see, and how far
through the list you are.
If the currently highlighted item is something that can
be selected simply push the Push Select knob. Other
options relating to the list or to the currently highlighted
item may appear in the Menu Bar.
The best way to get familiar with lists is to build and
experiment with a Library. See “The Library” section
for details.
Using Dialogs
A Dialog can appear in part or all of the Work Area and is used to send you information, to get a
response, to allow you to enter information or to change settings. Sometimes a Dialog may have its
own Menu Bar, other times not. There will always be a title so you know to what the Dialog refers.
To Next Page
Loading...
Need help?
General
