10
4.2.2. How to use TV-out cables correctly?
1.
Power off your PC and TV first.
2.
Connect the signal cable to the Video input at your TV from your VGA card, and
then power on your PC and TV.
Caution: Before you power on your
system, you have to be sure the VGA
card is setup correctly and all the
cables are connected.
DO NOT connect / disconnect TV-out
cable when your TV or PC is Power
On.
4.2.3. How to change TV setting?
1. You can click
“TV”
to switch VGA output
to TV.
A. Click
“Change Format”
to select which
standard TV you want.
When you select
“Make this format the
power-up default”
; the System will
change BIOS default to the format, when
you boot-up next time.
Turn Of
To Next Page
Loading...
Need help?
General
