OCULUS Myopia Master Advanced User Manual

17 Calculated correction of tonometrically measured IOP
Instruction Manual Myopia Master® (G/68100/EN Rev04 0820) 65 / 92
17.4 Performing IOP correction with the Myopia Master®
 Select an IOP-Table in the menu "Settings 1" (sec. 15.1, page 52).
 Perform a P+AR+K or a PARK + AXL measurement (sec. 12, page 28).
The results screen appears for the examined eye:
The IOP change value is displayed in the IOP change field (1). Depending
on the formula which is used, the IOP change value is either a summand
or a factor.
 Turn the control wheel until the "IOP Chg." field is activated.
 Press the control wheel.
The field for entering the tonometrically measured IOP value appears:
1IOP change field
Fig. 17-3: IOP change
Fig. 17-4: Entering tonometrically measured IOP manually
1

OCULUS Myopia Master Advanced Specifications

General

Brand	OCULUS
Model	Myopia Master Advanced
Category	Medical Equipment
Language	English