To Next Page

To Previous Page

Paper recommendations > 31

2. Adjust the rear paper support (5) to the size of paper you are using by gripping the

lugs, tilting and sliding the support forwards or backwards as necessary.

3. Adjust the paper guides (5). It is important to adjust the paper guides correctly to

ensure that the paper is not skewed in the print process. Paper jams may occur if

this operation is not carried out correctly.

4. Replace the tray in the printer (7). The paper level indicator (8) provides a visual

indication of how much paper is left in the tray.

Face up and face down printing

For face down printing, make sure the Rear cover is closed (the paper exits from the top

of the printer). The Output Stacker on the top of the printer stacks printed pages face down,

capacity 150 sheets of weight 75g/m². Pages printed in reading order (page 1 first) will be

sorted in reading order (last page on top, facing down).

For face up printing, make sure the Rear cover is open. In this condition, paper will exit via

this path, regardless of driver settings.

Always use this tray in conjunction with the Manual Feed Tray, Multi Purpose Tray or for

heavyweight stocks to reduce the possibility of paper jams.

See “Paper and tray information” on page 81.

Automatic feed sequence

With no optional feed trays installed, the Autotray function in the Print Menu is set by

default to ON and the Tray sequence function is set to DOWN. In this way, if a tray runs

out of paper, automatic feed will take place in the order Tray 1, Tray 2 (if fitted), Multi

Purpose Tray or the Manual Feed Tray, provided that these trays are set up for identical

media. Also, configure the media size and media weight for the respective trays in the

operator panel or Printer Menu Setup tool, depending on your printer model.

NOTE

If you have the optional second paper tray (Tray 2) and you are printing from

the first (upper) tray (Tray 1), you can pull out the second (lower) tray to

reload it. However, if printing from the second (lower) tray, do not pull out the

first (upper) tray as this will result in a paper jam.

Downloaded From ManualsPrinter.com Manuals

Other manuals for Oki B430DN

Questions and Answers:

Need help?

Do you have a question about the Oki B430DN and is the answer not in the manual?

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	5.5 s
Print speed (black, normal quality, A4/US Letter)	28 ppm
Internal memory	64 MB
Processor model	PowerPC405
Sound power level (standby)	30 dB
Sound pressure level (printing)	53 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Envelopes sizes	C5, C6, DL
Media weight (tray 1)	60 - 120gsm
Paper tray media types	Envelopes
Non-ISO print media sizes	Executive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A4, A5, A6
JIS B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Supported network protocols (IPv4)	TCP/IP:-ARP, IPv4/v6, TCPv4, ICMPv4/v6, UDPv4/v6, LPR, FTP, TELNET, HTTP(IPP), BOOTP, DHCP, AutoIP, SNMP, DNS, uPnP, Bonjour, WINS, Windows Rally(WSD-Print, LLTD), SLP, JetDirect protocols. Netware 3.x, 4.x, 5.x, and 6 with full NDS and NDPS support:- QServer over IP and IPX, R-Printer, N-Printer, NCP, SPX, IPX, SAP, RIP, Ethertalk:- ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP, PAP, NetBEUI: SMB, NetBIOS
Power requirements	230 VAC, 50 - 60Hz
Networking features	10/100BaseTX
Compatible operating systems	Windows 2000 / XP / XP x64 / Server 2003 / Server 2003 x64 / Vista (32-bit) / Vista (64-bit) / UNIX / Linux; Mac OS X PowerPC 10.2.8 + / OS X Intel 10.4.4 +
Display	LCD
Maximum duty cycle	70000 pages per month
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %