Oki B430DN User Manual

Printer drivers > 37
P RINTER DRIVERS
This chapter describes how to install a printer driver on two types of operating system –
Windows and Macintosh.
The printer drivers are all contained on the printer driver CD-ROM (CD1). Please refer to
the readme file on this CD for the latest information on printer driver installation.
W INDOWS OPERATING SYSTEMS
1. With Windows running, insert the printer driver CD-ROM (CD1) into your CD-ROM
drive.
2. If the CD does not run automatically, use Start > Run... and enter E:\setup (where E
is your CD-ROM drive) in the Open field.
3. Click on OK.
4. Select your printer model.
5. Click on Driver Installation > Install Printer Driver and follow the on-screen prompts
to complete your printer driver installation.
6. For the B410d and B410dn only, once the driver has
been installed, the Printer Menu Setup tool (at
right) is then automatically installed and the operator
panel language switching utility will run automatically.
7. For the B420dn and B430dn, once the driver has been
installed, the operator panel language switching utility
will run automatically. Choose your preferred operating
language. See “Changing language” on page 13.
I NSTALLED OPTIONS
Certain options may have been installed in your printer. For
those that are installed, check that they appear enabled on
the Menu Map.
Ensure that your options are set up in the printer driver(s) by
making the appropriate settings on the Device Options tab
(PCL emulation) and/or Device Settings tab (PS emulation)
described in the chapter entitled “Operation”.
M ACINTOSH OPERATING SYSTEMS
Please refer to the readme file on the CD for details on installing the appropriate Macintosh
drivers.
I NSTALLED OPTIONS
Ensure that any installed options are enabled in the printer driver.
C HOOSING A M AC DRIVER
The B410d, B410dn and B420dn models allow you to use only a PCL Mac driver.
The B430dn models can also use a PS driver on Macintosh operating systems.
NOTE
Take time to note the facilities available on the CD. For example, the Help
facility briefly describes each of the Software Utilities.
Downloaded From ManualsPrinter.com Manuals

Oki B430DN Specifications

General

Color	No
Duplex printing	Yes
Print technology	Laser
Maximum resolution	1200 x 1200 DPI
Time to first page (black, normal)	5.5 s
Print speed (black, normal quality, A4/US Letter)	28 ppm
Internal memory	64 MB
Processor model	PowerPC405
Sound power level (standby)	30 dB
Sound pressure level (printing)	53 dB
Total input capacity	250 sheets
Total output capacity	150 sheets
Envelopes sizes	C5, C6, DL
Media weight (tray 1)	60 - 120gsm
Paper tray media types	Envelopes
Non-ISO print media sizes	Executive (184 x 267mm), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A4, A5, A6
JIS B-series sizes (B0...B9)	B5
Maximum ISO A-series paper size	A4
Supported network protocols (IPv4)	TCP/IP:-ARP, IPv4/v6, TCPv4, ICMPv4/v6, UDPv4/v6, LPR, FTP, TELNET, HTTP(IPP), BOOTP, DHCP, AutoIP, SNMP, DNS, uPnP, Bonjour, WINS, Windows Rally(WSD-Print, LLTD), SLP, JetDirect protocols. Netware 3.x, 4.x, 5.x, and 6 with full NDS and NDPS support:- QServer over IP and IPX, R-Printer, N-Printer, NCP, SPX, IPX, SAP, RIP, Ethertalk:- ELAP, AARP, DDP, AEP, NBP, ZIP, RTMP, ATP, PAP, NetBEUI: SMB, NetBIOS
Power requirements	230 VAC, 50 - 60Hz
Networking features	10/100BaseTX
Compatible operating systems	Windows 2000 / XP / XP x64 / Server 2003 / Server 2003 x64 / Vista (32-bit) / Vista (64-bit) / UNIX / Linux; Mac OS X PowerPC 10.2.8 + / OS X Intel 10.4.4 +
Display	LCD
Maximum duty cycle	70000 pages per month
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	268 x 369 x 395 mm