EasyManuals Logo
Home>Oki>Printer>C612

Oki C612 User Manual

Oki C612
93 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
Menu functions > 33
A
DMIN
SETUP
ITEM SETTINGS EXPLANATION
Enter
Password
xxxxxxxxxxxx Enter a password to gain entry to the Admin
Setup menu.
Password should be from 6 to 12 digits of
alpha/numeric characters (or mix)
The default value is ā€œ999999ā€
Network
Setup
Enabling Default
Gateway
Wired
Wireless
(Infrastructure)
Sets a valid default gateway.
Display Conditions:
There should be built-in wireless LAN support
and Boot Menu > Wireless Module should
be enabled.
Wired Enable
Disable
Enables/Disables the wired LAN.
TCP/IP Enable
Disable
Sets TCP/IP Protocol.
Enable: TCP/IP Protocol is available.
Disable: TCP/IP Protocol is not available.
NetBIOS over TCP Enable
Disable
Sets Enable/Disable of NetBIOS over TCP
protocol.
Display Conditions: TCP/IP should be enabled.
IP Address Set Auto
Manual
Sets the IP Address setting method.
Display Conditions: TCP/IP should be enabled.
IPv4 Address xxx.xxx.xxx.xxx Sets the IP Address.
Display Conditions: TCP/IP should be enabled.
Subnet Mask xxx.xxx.xxx.xxx Sets the Subnet Mask.
Display Conditions: TCP/IP should be enabled.
Gateway Address xxx.xxx.xxx.xxx Sets the Gateway (default router) address.
0.0.0.0 means that there is no router.
Display Conditions: TCP/IP should be enabled.
DHCPv6 Enable
Disable
Sets Enable/Disable of DHCPv6.
Web Enable
Disable
Sets Enable/Disable of Web.
Enable: Web/IPP is available.
Disable: Web/IPP is not available.
Display Conditions: TCP/IP should be enabled.
Teln et En abl e
Disable
Sets Enable/Disable of Telnet.
Enable: Telnet is available.
Disable: Telnet is not available.
Display Conditions: TCP/IP should be enabled.
FTP Enable
Disable
Sets Enable/Disable of FTP.
Enable: FTP is available.
Disable: FTP is not available.
Display Conditions: TCP/IP should be enabled.
IPSec (if enabled) Enable
Disable
Sets Enable/Disable of IPSec. Enable via the web.
Enable: IPSec is available.
Disable: IPSec is not available.
SNMP Enable
Disable
Sets Enable/Disable of SNMP.
Enable: SNMP is available.
Disable: SNMP is not available.
Display Conditions: TCP/IP or NetWare
should be enabled.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki C612 and is the answer not in the manual?

Oki C612 Specifications

General IconGeneral
BrandOki
ModelC612
CategoryPrinter
LanguageEnglish

Related product manuals