Network configuration > 10
6. Select Oki Device
Quick Setup and
follow the on-screen
instructions.
7. When the settings
are correct, click
Execute. The new
settings are
transmitted to the
network card but it
still operates with
pre-transmission
settings.
8. Click Finish to validate the new settings.
9. Switch the printer off for 15 seconds and on again.
U
SING
A
DMIN
M
ANAGER
S
TANDARD
S
ETUP
AdminManager is a powerful Microsoft Windows-based utility to
configure all network interface functions easily and intuitively via
a graphical user interface.
Configuration requires a PC with Windows XP /2000 Advanced
Server or Vista, running TCP/IP or IPX/SPX (NetWare).
This utility can only be used on a PC that can be connected to the
network with TCP/IP or IPX/SPX and must be used on a PC that
is located on the same segment as the printer.
6
NOTE:
Not all utilities, features or protocols are supported by every
operating system. Please check with your User’s Guide and
support website for latest information.
To Next Page
Loading...
Need help?
General
