C9800 User’s Guide> 32
T
RAYS
AND
STACKERS
T
RAYS
1
TO
5
Tray 1 is the standard paper input tray and can hold up to 530
sheets of paper. Additional trays, to give a total of five, can be
added as an option to give a total tray capacity of 2650 sheets of
paper.
If you have identical paper stock loaded in another tray (for
example Tray 2 or the MP Tray), you can have the printer
automatically switch to that other tray when the current tray runs
out of paper. This function can be enabled by driver settings
when printing from a Windows application or by a menu setting
when printing from other applications.
MP
TRAY
The multi-purpose tray is used for media sizes additional to those
of the standard trays, heavier media weights and special media.
The multi-purpose tray can handle the same sizes as the
standard trays but in weights up to 268g/m². For very heavy
paper stock use the face-up paper stacker. This ensures that the
paper path through the printer is almost straight.
The multi-purpose tray can feed paper widths as small as
76.2mm and lengths up to 1200mm. For banner printing,
recommended sizes are A4 wide, 900mm and 1200mm long and
weight 128g/m². Since paper of width less than 100mm does not
autofeed, you have to press the ONLINE button to cause it to
feed.
Use the multi-purpose tray for printing on envelopes and
transparencies. Up to 100 sheets of transparencies or 25
envelopes can be loaded at one time, subject to a maximum
stacking depth of 25mm.
Transparencies
Glossy paper
A4, Letter 0.1 – 0.11mm Tray 1 or MP Tray
Face-up Stacker
TYPE SIZE WEIGHT INPUT/
OUTPUT
To Next Page
Loading...
Need help?
General
