C9800 User’s Guide> 68
I
NSTALLING
ACCESSORIES
Each accessory (apart from the Finisher and MFP Upgrade Kit)
comes complete with its own documentation which gives full
instructions on installation. You are advised to follow these
instructions carefully.
After installation, print out a Menu Map (Configuration document)
to check that the installation has been successful.
NOTE
The Finisher, MFP Upgrade Kit and Punch unit must be installed
by an authorised engineer.
For the following accessories, you have to make the appropriate
setting in your printer driver(s):
> paper tray(s)
> Finisher
Refer to the Printing Guide for driver setting details.
Once your printer has been upgraded with an MFP Upgrade Kit,
refer to the C9800 MFP User’s Guide on CD3.
To Next Page
Loading...
Need help?
General
