Oki MC332dn User Manual

Scanning > 73
S CAN TO R EMOTE PC
This function launches the Scanner driver from a utility installed on a PC (ActKey,
PaperPort, Image,Adobe Photoshop CS3, etc.) and starts scanning.
Connect the machine to a computer via USB or a network.
For PC Scan function, there are three modes; simple scan mode, secure scan mode and
WSD scan. In simple mode, the scanning can be started from all computers via USB and
Network. In secure scan mode, the scanning can be started from only the already
registered computers in the machine via USB and Network. In WSD Scan, the scanning
can be started from only the already registered computers in the machine via Network.
Only a computer can be connected at the same time.
MEMO
For the following procedure, ActKey will be used as an example for Windows,
and Adobe Photoshop CS3 for Mac OS X. The items in this manual may differ
depending on the application you are using.
NOTE
Connect the machine to a computer via USB or a network.
Install an application (ActKey, PaperPort, etc.) and a scanner driver before
starting a scan job. This installation is NOT required for WSD Scan
connection.
If you connect the machine to network, follow these instructions.
> Set TCP/IP setting to Enable.
> Conform the IP version of the machine to that of your computer.
> Set up the DNS server.
> Enable the network TWAIN setting.
When in Secure Scan Mode, the administrator needs to register the computer
information for carrying out security scans from the control panel or the web
site beforehand.
For Mac OS X, when carrying out a network scan for the first time, you need
to set the connection target when using a driver. When you use the driver for
the first time, the connection target selection tool will launch. You do not
need to set the connection target after the first time.
To operate the MFP in the WSD Scan connection, set the followings.
> Set the TCP/IP setting of the MFP to Enable.
> Match the IP version between the MFP and the PC.
> Enable the WSD Scan.
> Install the MFP on the PC.
REFERENCE
For details on how to install a scanner driver, refer to “Installing scanner
drivers (TWAIN/WIA/ICA driver)” on page 52.

Oki MC332dn Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	- DPI
Print speed (black, normal quality, A4/US Letter)	22 ppm
Print speed (color, normal quality, A4/US Letter)	20 ppm
All-in-one functions	Copy, Print, Scan
Color all-in-one functions	Scan
Digital sender	No
Maximum duty cycle	30000 pages per month
Page description languages	PCL 5c, PCL 6, PostScript 3, SIDM
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
Time to first copy (black, normal)	12 s
Time to first copy (color, normal)	14 s
Copy speed (black, normal quality, A4)	20 cpm
Copy speed (color, normal quality, A4)	22 cpm
Scan to	CIFS, E-mail, USB
Input color depth	48 bit
Output color depth	24 bit
Scan speed (black)	30 ppm
Optical scanning resolution	1200 x 1200 DPI
Total input capacity	250 sheets
Maximum input capacity	350 sheets
Multi-Purpose tray input capacity	100 sheets
Auto document feeder (ADF) input capacity	50 sheets
Envelopes sizes	9, DL
Maximum print size	216 x 297 mm
Duplex media weight	60 - 90 g/m²
Paper tray media types	Envelopes
Paper tray media weight	64 - 176 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
ISO C-series sizes (C0...C9)	C5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	64 - 220 g/m²
Auto Document Feeder (ADF) media weight	60 - 105 g/m²
Display	LCD
Product color	White
Display resolution	320 x 128 pixels
Market positioning	Business
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	2
Internal memory	256 MB
Sound power level (standby)	52 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (average operating)	500 W
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	509 mm
Width	427 mm
Height	444 mm