Installing upgrades > 133
I
NSTALLING
UPGRADES
This section explains how to install optional equipment into your MFP. This includes:
> additional RAM memory
> SD card (MC562dn, MC562w, MC562dw, ES5462 MFP, ES5462dw MFP and
MPS2731mc only)
> additional paper tray
M
EMORY
UPGRADE
The basic models come equipped with 256MB of main memory. This can be upgraded with
an additional memory board of 256MB or 512MB, giving a maximum total memory capacity
of 768MB.
1. Switch the MFP off and disconnect the power cable. Refer to “Turning off your
machine” on page 21 for details.
2. Remove the outer access cover and place it safely to one side.
3. Turn locking screw (a) anti-clockwise and remove the inner access cover (b). Place it
safely to one side.
To Next Page
Need help?
General
