Copying > 48
C
OPYING
B
ASIC
OPERATION
1. Place your document(s) with text face UP in the ADF or face DOWN on the glass.
2. If required, press the Copy button (1) on the control panel to prompt the Copy
screen.
3. Press Mono (2) to copy your document(s) in black and white, or Color(3) to copy
your document(s) in color.
I
NCREASING
COPY
COUNT
The machine is preset to a copy count of 1. If you wish to increase the number of copies,
select the number of copies with the numeric keypad.
To increase the copy count:
1. If required, press the Copy button on the control panel to prompt the Copy screen.
NOTE
If your Administrator has enabled access control on your machine, it will
automatically start up in access control mode. You will not be able to use it
until you have provided valid login information. Refer to “User authentication
and access control” on page 40 for details.
NOTE
“Toner Save Mode” settings is available to Copy Function.
NOTE
Factory default setting is Copy mode.
NOTE
If you wish to cancel the copy process, press Stop (4) to abort the operation.
To Next Page
Loading...
Need help?
General
