Scanning > 75
3. Press the to select Remote PC and then press OK.
4. Check that the TWAIN is selected, and press OK.
5. Start Adobe Photoshop CS3 on your computer.
6. Select Import from File to select OKI MC5(3)x2_ES5(3)4x2 USB or OKI
MC5(3)x2_ES5(3)4x2 Network.
> If you select OKI MC5(3)x2_ES5(3)4x2 USB, proceed to the step 10.
> If you select OKI MC5(3)x2_ES5(3)4x2 Network and the network scan is the
second or more scanning, proceed to the step 10.
7. For the first network scan, the dialog box indicating that the tool of connection
destination selection is started is displayed, and then click OK.
8. Select a connection destination in the Scan Settings dialog box, and register the
host information if necessary. Then, click OK.
9. Select Import from File of Adobe Photoshop CS3 to select OKI
MC5(3)x2_ES5(3)4x2 Network.
The window appears.
10. Click a scan button.
Scanning starts.
11. Select Quit Photoshop from Photoshop.
For Mac OS X (MPS2731mc)
If using Image Capture scanner drivers:
1. Press the SCAN key on the operator panel.
2. Place your document with text face up in the ADF or face down on the document
glass.
3. Press the to select Remote PC and then press OK.
4. Check that the TWAIN is selected, and press OK.
5. Start Image Capture on your computer.
6. Select the device.
7. Click a scan button.
Scanning starts.
8. Select Quit Image Capture from Image Capture.
If using TWAIN scanner drivers:
1. Press the SCAN key on the operator panel.
2. Place your document with text face up in the ADF or face down on the document
glass.
3. Press the to select Remote PC and then press OK.
4. Check that the TWAIN is selected, and press OK.
5. Start Adobe Photoshop CS3 on your computer.
NOTE
OS X 10.8 cannot use TWAIN scanner drivers.
To Next Page
Loading...
Need help?
General
