Oki MC873dn User Manual

Oki Data CONFIDENTIAL
45850101TH Rev.1
2-82
2. TROUBLESHOOTING PROCEDURES
2.5.10 Wireless Troubleshooting
(1) Cannot print through Wireless Network.
Confirmation Items Confirmation Tasks Action at NG
(1) Check Network Connection setting.
Check Network Connection is
Wireless not Wired.
Print out the network information.
Check Network Connection
setting is Wireless.
Set Wireless setting by
Manual Setup or Auto
Setup (WPS) to connect
to wireless access
point.
Network Connection
setting switches from
Wired to Wireless.
(2) Check the connection to the wireless LAN access point.
Check that the wireless LAN
setting is right and the device
is connecting to the wireless
LAN access point.
Check the panel of the device,
and Check whether the status
(“Not connected to wireless
access point.”) has occurred.
*1
Check the panel of the device,
and Check whether the
status (“Wireless settings are
incomplete.”) has occurred.
The settings of SSID,
the security setting,
the encryption key, and
the certificate, etc. are
insufficient. Please set
all necessary settings.
(3) Check whether it is possible to communicate by way of wireless LAN.
Check whether it is possible
to communicate via wireless
LAN.
Please refer to Network Troubleshooting for Checkation Tasks
and Action at NG.
Moreover, when wireless security is set to "WEP", the
connection to wireless LAN access point might not be able to
be communicated though does. Set it to the security setting of
wireless LAN access point additionally again.
*1 : Check once again whether the SSID, security setting, and an encrypting key of the wireless LAN
access point are same as the settings of this device. When any one of settings is different, the
device cannot be connected to the wireless LAN access point.
Check that a WEP key index of the wireless LAN access point is 1 when the security settings of the
wireless LAN access point are WEP. When a WEP key index of the wireless LAN access point is not 1,
it can not communicate with this device.
When a time-out error is displayed after automatic setting (WPS-PBC/PIN) execution, the
connection setting with the wireless LAN access point is not completed in time.
Start WPS of the wireless LAN access point as soon as you start WPS of this device. (It is no
problem that you start WPS of the wireless LAN access point first. )
When an overlap error is displayed after automatic setting (WPS-PBC) execution, there is a device
carrying out WPS in others. Carry out WPS again after a while.

Oki MC873dn Specifications

General

Duplex printing	Yes
Print technology	LED
Maximum resolution	1200 x 600 DPI
Time to first page (black, normal)	9.5 s
Print speed (black, normal quality, A3)	20 ppm
Print speed (black, normal quality, A4/US Letter)	35 ppm
Copier resize	25 - 400 %
Maximum copy resolution	600 x 1200 DPI
Maximum number of copies	999 copies
Time to first copy (black, normal)	10 s
Copy speed (black, normal quality, A4)	35 cpm
Scan to	CIFS, E-mail, FTP, HTTP, Image, USB
Scan drivers	TWAIN
Scanner type	ADF scanner
Output color depth	24 bit
Scan speed (color)	50 ppm
Image formats supported	JPG, TIF
Document formats supported	PDF, XPS
Optical scanning resolution	600 x 600 DPI
Faxing	Color faxing
Fax memory	8 MB
Modem speed	33.6 Kbit/s
Fax speed dialing (max numbers)	1000
Digital sender	-
Printing colors	Black, Cyan, Magenta, Yellow
Maximum duty cycle	75000 pages per month
Page description languages	Epson FX, IBM ProPrinter, PCL 5c, PCL 6, PDF 1.7, PostScript 3
Wi-Fi	No
Cabling technology	10/100/1000Base-T(X)
Security algorithms	802.1x RADIUS, EAP, SSL/TLS, WPA2
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Supported network protocols (IPv4)	TCP, DHCP, DHCPv6, BOOTP, HTTP, HTTPS, DNS, DDNS, WINS, , UPNP, Bonjour, SNMPv1&v3, SNTP, IPP, IPPS, WSD Print, WSD Scan, LLTD, IEEE802.1X, LPR, Port9100, Telnet, FTP, IPSEC, SecureProtocolServer, LDAP, LDAPS, CIFS, FTP, FTPS, SMTP, SMTPS, POP3
Internal memory	1260 MB
Internal storage capacity	250 GB
Sound power level (standby)	37 dB
Sound pressure level (printing)	54 dB
Paper input type	Paper tray
Total input capacity	300 sheets
Maximum input capacity	400 sheets
Total number of input trays	1
Auto document feeder (ADF) input capacity	100 sheets
Envelopes sizes	10, C4, C5, DL, Monarch
Custom media width	148.5 - 297 mm
Custom media length	210 - 431.8 mm
Paper tray media types	Banner, Envelopes, Plain paper
Paper tray media weight	64 - 220 g/m²
Non-ISO print media sizes	Executive (184 x 267mm), Folio (media size), Legal (media size), Letter (media size), Statement (140 x 216mm)
ISO A-series sizes (A0...A9)	A3, A4, A5, A6
ISO B-series sizes (B0...B9)	B4, B5
Maximum ISO A-series paper size	A3
Multi-Purpose Tray media weight	64 - 256 g/m²
Auto Document Feeder (ADF) media weight	60 - 120 g/m²
Display	LCD
Control type	Touch
Product color	Black, White
Display diagonal	7 \
Market positioning	Business
Standard interfaces	Ethernet, RJ-11, USB 2.0
Optional connectivity	Wireless LAN
USB 2.0 ports quantity	2
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	1400 W
Power consumption (off)	0.1 W
Power consumption (sleep)	3 W
Power consumption (PowerSave)	30 W
Power consumption (average operating)	850 W
Sustainability certificates	ENERGY STAR
Storage temperature (T-T)	0 - 43 °C
Operating temperature (T-T)	10 - 32 °C
Storage relative humidity (H-H)	10 - 90 %
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	600 mm
Width	563 mm
Height	700 mm