Page 4 of 20 P/N 58356302
General Information (continued)
What You Need to Know
Microline 300 Series Printers
The documentation, printer drivers, and network information are provided on the CD-ROM included with the printer.
Your printer has a parallel port, a USB (Universal Serial Bus) port, and a network interface (if your printer has a
network card).
The steps you use to install your printer vary according to your
• selection of port/interface
• type of printer (stand-alone or network)
• operating system
Microline 500 Series Printers
The documentation, printer drivers, and network information are provided on the CD-ROM included with the
printer.
Your printer has a parallel port and a network interface (if your printer has a network card).
The steps you use to install your printer vary according to your
• type of printer (stand-alone or network)
• operating system
Product Changes
The product has changed since the publication of the documentation. The changes are described in this document.
The documentation for your printer is provided as a combination of
on-line documentation on the CD
and
hardcopy documentation provided with the printer.
For the Microline 300 Series Printers, the changes are:
• A USB (Universal Serial Bus) port has been added to the printer.
• The CSF (Cut Sheet Feeder) connector has been moved to the top, back, left-hand corner of the printer.
• The printer menu has additional items.
• The maximum receive buffer size is 128 Kbytes.
For the Microline 500 Series Printers, the changes are:
• Most of the printer documentation is provided as on-line documents on the CD.
• Printer drivers are provided on the CD.
• Your printer may include a network card.
To Next Page
Loading...
Need help?
General