EasyManuals Logo
Home>Oki>Printer>ML186

Oki ML186 Safety & Warranty

Oki ML186
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7 - English
Material Safety Data Sheet (MSDS)
MSDS N° 58064801
for 52102001 Black Ribbon
For more information, contact Oki Data at: 2000 Bishops
Gate Boulevard, Mount Laurel, NJ 08054-4620.
Emergency Information (US and Canada only): call
1-800-654-3282.
To check for updates, visit http://my.okidata.com.
Emergency First Aid Procedures _____
Ribbon or ink swallowed (ingested).
Immediately seek medical attention. Never give anything by
mouth to an unconscious person. If possible, rinse out
mouth and give one or two glasses of water or milk to drink.
Contact occurs with eyes.
Flush eyes with large quantities of water for 15 minutes,
keeping eyelids open with fingers. If necessary, seek medical
attention.
Contact occurs with skin.
Wash thoroughly with soap and water. If necessary, seek
medical attention.
Hazardous Ingredients ____________
Carbon Black (4.0% by weight)
[Group 2B “Possible Carcinogen”; IARC]
CAS#: 1333-86-4
OSHA TWA: 3.5 mg/m
3
ACGIH TLV: 3.5 mg/m
3
LD
50
: Not available.
LC
50
: Not available.
Coloring Material Oil
CAS#: Not available. CAS#: Not: available.
OSHA TWA :Not available. OSHA TWA Not available.
ACGIH TLV: Not available. ACGIH TLV: Not available.
LD
50
: Not available. LD
50
: Not available.
LC
50
: Not available. LC
50
: Not available.
Additives Nylon 6-6 Fabric
CAS#: Not available. CAS#: Not available.
OSHA TWA: Not available. OSHA TWA: Not available .
ACGIH TLV: Not available. ACGIH TLV: Not available.
LD
50
: Not available. LD
50
: Not available.
LC
50
: Not available. LC
50
: Not available.
PSM Fiber
CAS N°: Not available.
OSHA TWA :Not available.
ACGIH TLV: Not available.
LD
50
: Not available.
LC
50
: Not available.
Physical Data ____________________
Physical State:
Solid.
Melting/Freezing Point:
Not applicable.
Boiling Point:
Not applicable.
pH:
Not
applicable
.
Vapor Pressure:
Not available.
Vapor Density (Air=1):
Not applicable.
Evaporation Rate (Butyl Acetate=1):
Not available.
Specific Gravity (H
2
O=1):
Not available.
Solubility in Water:
Not available.
Solubility in Solvents:
Not available.
Coefficient of water/oil Distribution:
Not available.
Appearance and Odor:
Nylon 6-6 fabric impregnated with
liquid black ink.
Odor Threshold:
Not available.
Percent Volatile:
Not available.
Fire and Explosion Hazard Data ______
Flash Point:
Not applicable.
Flammable Limits
Lower Explosive Limit:
Not applicable.
Upper Explosive Limit:
Not applicable.
Auto-Ignition Temperature
: Not applicable.
Explosion Data
Sensitivity to Mechanical Impact:
Not available.
Sensitivity to Static Discharge:
Not available.
Extinguishing Media:
Water, CO
2
, dry chemical or foam.
Special Fire Fighting Procedures:
Not applicable.
Hazardous Combustion Products:
Not applicable.
Toxicological Properties____________
Routes of Entry:
Ingestion, Eyes, Skin.
Effects of Acute Exposure:
Not available.
Effects of Chronic Exposure:
Not available.
Exposure Limits (
ACGIH TLV
):
Inhalable Particulates:
Not available.
Respirable Particulates:
Not available.
Irritancy:
Not available.
Sensitivity:
Not available.
Carcinogenicity
IARC: Carbon Black—Group 2B, "Possible Carcingogen“.
NTP: No components are listed.
OSHA: Carbon black is designated hazardous according to
OSHA 29 CFR 1910.1200.
Reproductive Toxicity:
Not available.
Teratogenicity:
Not available.
Mutagenicity:
Not available.
Names of Toxicologically Synergistic Products:
Not
available.

Other manuals for Oki ML186

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Oki ML186 and is the answer not in the manual?

Oki ML186 Specifications

Technology and Print Characteristics IconTechnology and Print Characteristics
printhead9-Pin SIDM
graphics resolution240 (H) x 216 (V) dpi maximum
feed rate2.0 ips
character pitch10, 12, 15, 17.1 and 20 cpi
print speed62.5 cps (NLQ), 250 cps (Utility), 333 cps (HS Draft), 375 cps (SS Draft)
matrix12 x 17 (NLQ), 12 x 9 (Utility), 10 x 9 (HS Draft), 8 x 9 (SS Draft)
Emulation, Interface and Memory IconEmulation, Interface and Memory
co-resident emulationsIBM 2480, Epson ESC/P, OKI MICROLINE
interfaceIntegrated USB and IEEE Parallel, Optional RS-232C Serial, Ethernet via OkiLAN 6020e
memory128K Receive Buffer
Paper Handling IconPaper Handling
paper inputSingle-part, Multi-part, Continuous forms, Cut sheet, Card stock, Envelopes, Labels
number of copies4-part Rear Feed, 5-part Bottom Feed
thickness0.011" (0.28mm) maximum
Warranty and Reliability IconWarranty and Reliability
limited warranty3-Year parts and labor, 2-Year printhead
MTBF20, 000 hours (25% duty cycle/35% page density)
monthly workload13, 000 pages at 25% duty cycle/35% density
printhead life200 million characters avg. in 10 cpi utility mode at 25% duty, 35% page density
ribbon life3 million characters (Utility mode)
Environmental IconEnvironmental
size14.65" x 10.83" x 3.15" (37.2 cm x 27.5 cm x 8.0 cm)
net weight10 lb. (4.5 kg)
acoustic noise58 dBA

Related product manuals