Operator panels > 14
C
HANGING
LANGUAGE
The default language used by your printer for display messages and for report printing is
English. If required, this can be changed to:
C
ONFIGURATION
TOOL
Installation of the Configuration tool can be found on the Drivers/Utilities DVD under the
Utilities folder. Follow the on-screen instructions to complete the Configuration tool
installation.This Configuration Tool is used to control and change the various printer
settings.
Using the Configuration Tool
Viewing or changing the printer settings are carried out as follows:
Click on Start > All Programs > Okidata > Configuration Tool and select the
Configuration Tool.
German Danish
French Dutch
Italian Turkish
Spanish Portuguese
Swedish Polish
Russian Greek
Finnish Czech
Hungarian Norwegian
NOTE
1. The Operator Panel Language Setup Wizard will run automatically when
you install the printer driver. Follow the instructions provided by this
utility to set your chosen language.
2. The list above is neither conclusive nor exhaustive.
To Next Page
Loading...
Need help?
General
