Set the power switch to ON.
* When the camera is not in use,
always set the power switch to OFF
so that the shutter cannot be
activated accidentally.
While looking through the
viewfinder, aim the camera at your
subject.
Simple point &
shoot
photography
How to take pictures
When the power switch is ON,
the LCD panel lights.
The LCD panel goes out after 4 to
5 minutes to minimize battery
drain. The lens will then zoom to
the wide-angle position. After 4
hours the power is automatically
turned to OFF. To resume
operation, set the power switch
to OFF and then to ON again.
14
To Next Page
Loading...
Need help?
General
