Using
OLYMPUS
Master
.
Using the USB cable provided with your camera, you can connect the camera and computer and download
(transfer) the images to your computer using the OLYMPUS Master software, also provided with the camera.
Computer that meets the operating
environment (P. 37).
USB cableOLYMPUS Master2
CD-ROM
Prepare the following items before starting.
----------------------.,.
What
is
OLYMPUS
Master?
OLYMPUS Master is a software application for managing your digital images on your computer.
Install
the
OLYMPUS
Master
software
Before installing the OLYMPUS Master software, please confirm that your computer is compatible with the
following system requirements.
For newer operating systems, please refer to the Olympus web site as shown on the back cover
of
this
manual.
Operating
environment
Windows
Macintosh
as
Windows 2000 Professional/XP Home Mac
as
x v10.3 or later
Edition/XP ProfessionalNista
CPU Pentium III 500 MHz or later Power PC G3 500 MHz or later
Intel Core Solo/Duo 1.5 GHz or later
RAM 256 MB
or
more
256 MB or more
Hard
disk
capacity
500 MB or more
500 MB or more
Monitor
1,024 x 768 pixels or more 1,024 x 768 pixels or more
65,536 colors
or
more (16.77 million colors 32,000 colors or more (16.77 million colors
or more recommended) or more recommended)
Other
USB port
or
IEEE 1394 port USB port or IEEE 1394 port (FireWire)
Internet Explorer 6 or later Safari 1.0 or later (1.3 or later
QuickTime 7 or later recommended recommended)
DirectX 9 or later recommended
QuickTime 6 or later
c
C/l
:::J
<0
o
r
-<
s:
"'U
C
(f)
s:
m
C/l
r-+
CD
....,
UNote
o
Use
a
computer
with a
pre-installed
operating
system.
Operations
are
not
guaranteed
on
home-built
computers
or
computers
with
an
updated
operating
system
.
•
Operations
are
not
guaranteed
when
using
an
added
USB
port
or
IEEE 1394 port.
o
To
install
the
software,
you
must
log
on
as
a
user
with
administrators'
privileges
.
•
If
you
are
using
Macintosh,
be
sure
to
remove
the
media
(drag &
drop
onto
the
trash
icon)
before
performing
the
following
operations.
Failure
to
do
so
could
result
in
unstable
computer
operation
and
the
need
to
reboot.
•
Disconnect
the
cable
connecting
the
camera
to
the
computer
•
Turn
off
the
camera
•
Open
the
camera's
battery/card
compartment
cover
For
how
to
install
the
OLYMPUS
Master
software,
refer
to
the
installation
guide
included
in
the
CO-
lROM.
EN
31
To Next Page
Loading...
Need help?
General
