Olympus STYLUS 300 User Manual

9
Printing pictures
When the camera is connected to a PictBridge-
compatible printer, the PRINT MODE SELECT
screen is displayed on the monitor. Use this
screen to select the print mode. You can choose
from the following print modes.
PRINT Prints the selected picture.
“PRINT mode/MULTI PRINT mode” (P.9)
ALL PRINT Prints all the pictures stored on the card.
“ALL PRINT mode” (P.13)
MULTI PRINT * Prints one picture in multiple layout format.
“PRINT mode/MULTI PRINT mode” (P.9)
ALL INDEX * Prints an index of all the pictures stored on the card.
“ALL INDEX mode/PRINT ORDER mode” (P.15)
PRINT ORDER * Prints the pictures according to the print reservation data
on the card. If no print reservations (
P.111) have
been made, this option is not available.
“ALL INDEX mode/PRINT ORDER mode” (P.15)
* This option may not be available depending on the type of printer.
PRINT mode/MULTI PRINT mode
1 In the PRINT MODE SELECT
screen, press
to select
PRINT or MULTI PRINT, then press
.
• The print size settings screen is
displayed.
GO
SELECt EXIt
Arrow pad ( )

Olympus STYLUS 300 Specifications

General

Optical Sensor Resolution	3.2 megapixels
Optical zoom	3x
Digital zoom	4x
Image sensor size	1/2.5 inch
Supported Flash Memory	xD-Picture Card
Camera type	Compact
LCD Screen Size	1.5 inches
Battery Type	Li-Ion rechargeable battery
Dimensions	99 x 56 x 33 mm (3.9 x 2.2 x 1.3 in)