47
EN
Submenu 2 Application
Reset
This resets the sequential number
for the folder name and fi le name
whenever a new card is inserted.
*1
This is useful when grouping
images on separate cards.
Auto
Even when a new card is inserted,
this continues the numbering for
the folder name and fi le name
from the previous card. This is
useful for managing all image
folder names and fi les names with
sequential numbers.
*1
The number for the folder name is reset to 100,
and the one for the fi le name is reset to 0001.
Adjusting the image processing
Adjusting the image processing
function
d
[Pixel Mapping]
● This function has already been adjusted at factory
shipping, and no adjustment is needed right
after purchase. Approximately once a year is
recommended.
● For best results, wait at least one minute after
taking or viewing pictures before performing pixel
mapping. If the camera is turned off during pixel
mapping, be sure to perform it again.
To adjust the image processing function
To adjust the image processing function
Press the A button when [Start] (Submenu 2) is
displayed.
● The check and adjustment of the image
processing function starts.
Adjusting the brightness of the
Adjusting the brightness of the
monitor
d
[
s
]
To adjust the monitor brightness
To adjust the monitor brightness
1 Use FG to adjust the brightness while viewing
the screen, and then press the A button.
MENU
Back
s
To Next Page
Loading...
Need help?
General
