16
1
EN
Power supply
Power supply
Charging by connecting to a
computer via USB
You can charge the battery by connecting
to a PC’s USB port. When charging, be sure
to place the rechargeable battery (supplied)
correctly into the recorder ( ☞ P.14).
1 Boot the PC.
2 Slide the USB connector slide
lever in the direction indicated
by the arrow so that the USB
connector protrudes from the
recorder.
Do not charge a primary battery such
as an alkaline or lithium battery. It
may cause battery leakage or heating,
which may cause the recorder to
malfunction.
For WS-813, WS-812:
3 Make sure that the recorder is in
stop mode, and connect to the
PC’s USB port.
4 Press the `
OK
button to start
charging.
• While [ Press OK to start charging ] is
flashing, press the ` OK button.
5 Charging is completed when the
battery indicator shows [ ].
Before connecting via USB, exit HOLD
mode ( ☞ P.20).
Charging time: approximately 3 hours *
* This is the approximate time when
charging the rechargeable battery
fully from flat at room temperature.
To Next Page
Loading...
Need help?
General
