20
1
EN
HOLD
If you set the recorder to HOLD mode, the current settings will be preserved and all buttons
will be disabled. This feature is useful when the recorder has to be carried in a bag or pocket.
This mode can also prevent you from accidentally stopping recording.
Setting the recorder to HOLD mode
Slide the
POWER
/
HOLD
switch to the
[
HOLD
] position.
• After [ H o l d ] appears on the display, the
recorder is set to HOLD mode.
Notes
• If you press any button while the recorder is in HOLD mode, the clock display lights for 2
seconds, but the recorder does not operate.
• If HOLD is applied during playback (recording), operation is disabled with the playback
(recording) state unchanged (When playback has ended or recording has ended due to
the remaining memory being used up, the recorder stops).
HOLD
Exiting HOLD mode
Slide the
POWER
/
HOLD
switch to the
A position.
To Next Page
Loading...
Need help?
General
