17
3.3 Taking a Measurement
Notes:
• To stop the measurement, press the START/STOP button once to deflate
the arm cuff.
• Remain still and quiet while taking a measurement.
1. Press the START/STOP button.
The arm cuff will start to inflate automatically.
START INFLATING COMPLETED
If your systolic pressure is more than 210 mmHg
After the arm cuff starts to inflate, press and hold the START/STOP
button until the monitor inflates 30 to 40 mmHg higher than your
expected systolic pressure.
Notes:
•The monitor will not inflate above 299 mmHg.
Caution
Inflating to a higher pressure than necessary may
result in bruising where the arm cuff is applied.
To Next Page
Loading...
Need help?
General
