31
2-3 Peripheral Devices
There are various Peripheral Devices that can be use to support C200HX/
C200HG/C200HE operation. These Peripheral Devices are introduced in this
section.
2-3-1 Programming Consoles
There are two Programming Consoles that can be used with the C200HX/
C200HG/C200HE: the C200H-PRO27-E and the CQM1-PRO01-E. The follow-
ing illustration shows the C200H-PRO27-E Programming Console.
C200H-CN222 (2 m) or
C200H-CN422 (4 m), Connecting
Cable
C200H-PRO27-E Programming Console
Connected to Peripheral Port on CPU Unit.
As shown in the illustration, the C200H-PRO27-E Programming Console con-
nects to the C200HX/C200HG/C200HE CPU Unit with C200H-CN222 or
C200H-CN422 Connecting Cable, which must be purchased separately.
The CQM1-PRO01-E Programming Console comes with 2 m of Connecting
Cable.
2-3-2 Ladder Support Software (LSS)
The LSS is a powerful support software package for the OMRON C-series Pro-
grammable Controllers (PCs). The LSS runs on an IBM PC/AT or compatible
personal computer, and can be use to program, monitor and control PCs. While
some PCs require a SYSMAC NET Link Unit, Host Link Unit, or Peripheral Inter-
face Unit to connect the computer running LSS, the C200HX/C200HG/C200HE
can be connected directly to the LSS via it’s peripheral or RS-232C port.
The LSS provides displays of various useful lists when the computer is operated
offline and can be used to monitor operating conditions of the PC, and to read
and write PC data. PC programs can be developed in a mnemonic or ladder dia-
gram form.
The LSS supports the C200HX/C200HG/C200HE only within the functions
available for the C200HS.
Peripheral Devices
Section 2-3
To Next Page
Loading...
Need help?
General
