Omron E5*C-B Series User Manual

2 Preparations
2 - 46
E5@C Digital Temperature Controllers User’s Manual (H174)
 Terminal Arrangement
The terminals block of the E5DC is divided into five types of terminals: control output 1, sensor input, auxiliary
outputs, input power supply, and options.
Precautions for Correct Use
• When you purchase the Digital Controller, it will be set for a K thermocouple (input type = 5). If
a different sensor is used, an input error (s.err) will occur. Check the setting of the Input Type
parameter.
• The terminal arrangement is different for the E5DC-B. Always check the terminal arrangement
diagram before wiring.
 Model Numbers
The specification for control output 1 is given in the following location in the model number.
 Terminal Details
2-2-6 E5DC Terminal Block Wiring Example
Control Output 1
Code Output type Specifications
RX 1 relay output 250 VAC, 3 A (resistive load)
QX 1 voltage output (for driving SSR) 12 VDC, 21 mA
CX 1 linear current output 4 to 20 mA DC or 0 to 20 mA DC with load of 500 Ω max.
RX QX CX
1
4
37
814
13
12
2
5
6
9
10
11
Auxiliary outputs
Options
Control output 1
Sensor input
Input power supply
E5DC-@@ @ @ @ M-@@@
Control output 1
E
F
Relay
output
Control Output 1
E
F
+
−
Control output 1
Voltage output
(for driving SSR)
E
F
+
−
Control Output 1
Linear current
output

Omron E5*C-B Series Specifications

General

Brand	Omron
Model	E5*C-B Series
Category	Controller
Language	English