1817
Press to change the display.
Step count display
Distance display
Calories display
Fat burned display
Time display
READING THE ACTIVITY
TRACKER DISPLAY
MEMORY FUNCTION
This unit automatically stores 7 days of measurements
for steps, distance, calories burned and fat burned.
The clock automatically resets itself at midnight to
begin measuring the next day’s activity level.
1 Press to select the type of
measurement you want to see (steps,
distance, etc).
2 Press
to view the results (days 1-7) in
memory.
The display changes with each press of as
shown below.
• Keep pressed to automatically change the
display until the current display is displayed.
• Press to return to the current display.
NOTES:
• Only one session of information from the
Activity Tracker/Activity Measurement Mode
is stored in memory (refer to page 16).
• You cannot use the memory function when
using activity measurement mode (refer to
page 16).
•
If no buttons are pressed for more than 1 minute,
the display returns to the current display.
Make sure the time is correctly set in the unit.
Current display
Activity measurement
mode memory
Memory for 1 to
7 days ago
To Next Page
Loading...
Need help?
General
